General
- Assess for associated injury
- BP decreases in quadriplegia = neurogenic shock, due to disruption of sympathetic outflow and unopposed vagal tone
- Do not fluid overload
- Bradycardia / arrhythmias may be present
- Respiratory : if vital capacity is less than 20% predicted or less than 1000 cc, may need tracheostomy
Assessment of cervical cord injuries
Plain XRay
Direct XRay evidence of instability
- Increased angulation between spinous processes more than 11 degrees than in adjacent segments
- Anterior or posterior translation of the vertebral bodies more than 3.5 mm
- Segmental disc space widening on lateral XRay
- Facet joint widening
- Malalignment of spinous processes of anterior view
- Rotation of the facets on lateral XRay
- Tilt of vertebral body on anterior XRay
XRay findings suggestive of unstable injuries
- Increased retropharyngeal space
- Anterior to C3 : not more than 3 mm
- C4 and below : normal varies 8-10 mm
- Minimal compression fracture of anterior vertebral bodies
- Avulsion fracture at or near insertion of spinal ligaments
- Nondisplaced fracture lines
Tomography
Good for posterior elements, dens fracture
CT
- Assess bony encroachment on canal
- Best method for accurate bone definition
MRI
- Evaluate neural elements
- Disc disruption
- Ligamentous disruption
Stress XRays
Flexion-extension contraindicated in altered state of consciousness
The 3-column Cervical spine
ref: Allen, BL; "Recognition of injuries to the lower cervical spine." In cervical spine research committee: The Cervical Spine : 286-298. Philadelphia, JB Lippincott,1989
- Denis first described the 3 column spine in relation to thoracolumbar fractures
- This 3 column concept has been extended to the cervical spine by Allen
- Each cervical motion segment can be divided into :
- Anterior
- Resists compression by vertebral body centrum, anterior disc
- Resists tension by anterior annulus, anterior longitudinal ligament
- Middle
- Resist compression by posterior vertebral body and the 2 unco-vertebral joints
- There is no significant disc material in the middle column
- Resists tension by posterior annulus, posterior longitudinal ligament
- Posterior
- Resists compression by R+L facet joints and lateral masses
- Resists tension by facet joint capsules, interspinous ligaments
- Anterior
Unstable Cervical Injuries
- Atlanto-occipital joint translation more than 1 mm
- Apex of dens to basion more than 5 mm
- Anterior translation of vertebrae more than 3.5 mm
- Flexion at any one level of more than 11
- Facet joints subluxation of more than 50%
- Traumatic rupture of transverse (cruciate) ligament, indicated if the atlanto-dens interval is more than 3 mm in an adult and more than 5 mm in children
- Jefferson fracture with lateral shift of the lateral masses of C1 on C2 of more than 7 mm implies division of the transverse ligament allowing the two halves to separate
- Unilateral facet dislocation classically leads to anterior subluxation of up to 25%, whereas bilateral dislocation results in anterior subluxation of at least 50%
- Retropharyngeal soft tissue should not exceed 3 mm at C3 and should not be greater than the width of the vertebral bodies below the level of C 4/5
Atlanto- Occipital Dislocation
- Due to hyperextension and distraction
- The basion to posterior arch of C1 distance is less than opisthion to anterior arch C1; if this is reversed, dislocation has occurred
- Treatment
- Often fatal, if not fatal avoid traction
- Definitive treatment is fusion of occiput to C1
Transverse ligament ruptures
- May occur alone or with fractured atlas or atlanto-axial subluxation
- Due to flexion
- Transverse ligament is the main restraint to anterior motion of C1
- Normal distance between anterior ring of atlas and dens is less than 3 mm
- Treatment
- If there is bony avulsion, immobilise in SOMI until healed
- Then check flexion-extension views to assess transverse ligament competency
- If there is midsubstance tear, perform primary atlanto-axial fusion
Atlanto-axial rotatory subluxation
- Due to trauma or spontaneous
- Patients complain of neck pain, occipital neuralgia, occasionally symptoms of vertebrobasilar insufficiency
- Odontoid view shows rotation
- AP view shows C2 spine rotated off midline
- CT
- Perform in R+L rotation
- If C1 fails to reposition = fixed deformity, shows the dens separates from the anterior arch of C1 with increased rotation
- Classification
- Atlantodental interval less than 3 mm= intact transverse ligament
- 3-5 mm = failed transverse ligament, but intact alar ligaments
- More than 5 mm = failed transverse ligament and alar ligaments
- Complete posterior dislocation of atlas
- Treatment
- All symptomatic subluxations should be reduced through light weight skeletal traction and physiotherapy
- After reduction, if transverse ligament is insufficient, fuse C1 to C2 (types 2,3,4)
Atlas Fracture
- Due to axial compression, leading to forced widening of ring
- Hyperextension causes posterior arch fracture
- If combined overlap is more than 7 mm in odontoid view , the transverse ligament is insufficient
- Treatment
- Stable fracture : hard collar for 8 weeks, e.g. simple arch fracture, undisplaced lateral mass fracture, fracture TP
- Unstable fracture : immobilise in SOMI / halo for 8 weeks
Odontoid Fracture
Classification: (Anderson & Alonzo)
Types
- Avulsion of the tip (avulsion fracture of alar ligament)
- Waist fracture (junction of dens with body of axis)
- 50% heal with immobilisation, but series reported with 20 – 80% going on to non-union
- Increased risk of non union if
- Initial displacement more than 5 mm or 10 degrees angulation
- Posterior vs. anterior displacement
- Age greater than 50 years
- Treatment with prolonged traction
- No halo
- Fracture into body of C2
Treatment
Type
- Stable
- If more than 5 mm displacement or 10 degrees angulation, is high risk for nonunion : SOMI for 8 weeks
- High risk for nonunion if treated with hard collar alone : SOMI for 8 weeks
Traumatic spondylolisthesis of C2
Levine and Edwards " management of traumatic spondylolisthesis of the axis"JBJS 67A: 217-226, 1985
Type
- No angulation, up to 3 mm of anterior translation, stable
- Angulation more than 10 degrees and anterior translation more than 3 mm
- Severe angulation and displacement, because of dislocation of one or both C 2-3 facets
Treatment
Type
- Hard collar for 8 weeks
- SOMI for 8 weeks
- Very unstable. CR of dislocated facets may not be possible. May need ORIF with fusion
